Previous product

Hatterman MK7 industrial helmet with goggles تومان 100

Back to products

Next product

کلاه ایمنی کار در ارتفاع هترمن مدل mk8 آبی

Hatterman MK8 is a Helmet for working at high altitude تومان 100

Hatterman MK8 industrial helmet and engineering helmet

Hatterman MK8 industrial helmet and engineering helmet is made of standard raw materials and has the approval of the Research Center of the Ministry of Labor of Iran, CE, and EN of Europe. The MK8 helmet provides high comfort and safety for users in working conditions at high altitude.

Industrial and engineering helmets

Features of the MK8 helmet

All over the world, the industrial helmet is considered one of the most important and key types of Health, Safety, and environment (HSE) equipment. This workshop helmet can be used in all construction and road construction operations by providing the best safety while working.

On the sides of the helmet shell, two drawers provide the ability to install an air muff.

Helmet sizing

Helmets that are too big or too small, even if they have all the requirements, are not suitable for use. The head protection must fit perfectly to the user's head. Most of the head protectors are in various sizes with the ability to adjust the headband to provide fit to the head size of people. A head protector must have sufficient clearance between the helmet shell and the suspension system for ventilation and impact distribution. You should never put anything in the space of the suspension system and protective shell of the helmet because doing so can reduce the ability of the helmet to absorb shocks.

Safety standards

Are you concerned about health and safety at work?

Workplace safety standards are a set of standards that are carried out aimed at workplace safety and reducing occupational risks caused by occupational injuries. Hatterman safety equipment has Iran Research Center standards, American ANSI standards, and European CE-EN standards.

Various helmet accessories

Some helmets have various accessories, such as earmuffs, safety glasses, face shields, and lights, which make it possible for workers and engineers to use the Hatterman MK8 model for working at high altitude in the face of various environmental conditions. A brimmed helmet may provide additional protection from the sun, and some helmets have channels to direct rainwater away from the face. These accessories shall not invalidate the primary use of the safety equipment.

Types of MK8 helmet ratchets

Variety in rigging type and band size adjustment

Variety in regulation and band size adjustment

The type of regulation and size adjustment of the band inside the helmet can be one of three push button modes (Push Lock), rotary ratchet (Well Ratchet), or easy open. You can view its specifications.

Your comfort and safety with an industrial helmet

-Its cap, strap, and internal fittings with an integrated design provide the best performance to keep it fixed on the user's head even in the event of a fall.
-The layer material of this workshop helmet is ABS resistant polymer. This material has the highest global standards for the production of helmets for working at height.
-In the inner part of this helmet, a soft plastic frame is designed in which the user's head is placed inside. In addition, to provide more safety, this internal frame will increase the comfort of using the hat.
-The MK8 helmet provides unique protection against the front, side, or rear blows by using a polystyrene bumper.
-Both outer and inner layers have ventilation holes to reduce heat and increase user comfort.

-The MK8 industrial helmet, especially with the special design of the outer layer, provides maximum head protection while working in industrial and workshop environments.
-The helmet strap has 6 points of support so that in addition to the safety of your head, it is at peace.
-Cotton fibers, known as Egyptian fibers, have been used in the forehead area of the helmet to dry the sweat on the forehead and provide peace and comfort to the users.
-This helmet is specially designed with a suspension system and outer layer to provide maximum head protection when working at height, whether it is industrial work, climbing, or rescue operations.

Air conditioning inside the helmet

-In the upper part of the helmet shell, ventilation (air ventilation holes) is installed, which makes the use of this product suitable in hot weather conditions.
-In addition, to create more safety, this internal frame will increase the comfort of using the helmet, because due to the distance it creates between the head and the body of the hat, it will cause better airflow inside the hat.
-Also, the small openings on the body of the helmet help better air circulation inside the helmet.

Click to enlarge

Hatterman MK8 industrial helmet and engineering helmet

تومان 100

Type

Helmet

Application

Resistant to falling and impact

Model

Class

E Class

Special features

Push button ratchet Open the ratchet easily Rotary ratchet
Head bumper
Size adjustment bar (53 to 64 cm)
Forehead sweatband
Silk retaining strips
Air ventilation holes

net weight

300 grams

Standard

EN 397 :2012
Confirmation of the Research Center of the Ministry of Labor

Manufacturing Country

Iran

Compare

Add to wishlist

How to order and send

How to order and send

Type

Helmet

Application

Resistant to falling and impact

Model

MK8

Class

E Class

Special features

Push button ratchet Open the ratchet easily Rotary ratchet

Head bumper

Size adjustment bar (53 to 64 cm)

Forehead sweatband

Silk retaining strips

Ventilation holes or ventalation

net weight

300 grams

Standard

EN 397 :2012

Confirmation of the Research Center of the Ministry of Labor

Manufacturing Country

Iran

Sales guarantee

Hatterman MK8 industrial helmet is supplied with a 12-month warranty, and all its fittings and accessories can be replaced and installed separately.

How to order the product

To order the product, contact us through the contact page.